Image 1 of 3
Image 2 of 3
Image 3 of 3
Installation Instructions:
IMPORTANT: Occasionally the straps that tie the boards down to the pad come in upside down for packaging purposes. You need to twist them so they are right-side up BEFORE you install the tail gate pad on your truck.
First remove all of the rubber bands.
Lay out the pad flat on the ground so the VAMO logos are facing upward.
The pad should run parallel with your tail gate.
The silicone covered buckles should be pointing toward the cab of your truck with the nylon web straps facing away from your tail gate.
Set the pad on the tail gate with the silicone buckles resting on the inside bed liner of the tailgate.
Hold the tail gate and pad with one hand with the tailgate making a 45 degree angle from the truck.
Using your other hand slip the nylon webbing hanging from the pad on the ground through the bottom crack between the tailgate and the bed of your truck. (Be sure your straps are straight to avoid twisting).
Thread the nylon webbing through the silicone buckles and synch it down till tight. Your tail gate pad should be ready to put a board on top and synch down the boards with the remaining strap.
